The connector is connected with the basic function of the equipment provided based on decades of service guarantee, with the application of the deterioration of the environment, the original connector performance and reliability will decrease, this has prompted the passion for innovation model connector, connector is widely used in industrial R & D and this condition is based on.
Industrial connector most early by Simon company research and development, the research and development of the socket and the plug to maintain a very effective resistance is still in the bad environment, in which RJ-45 model reach P67 grade evaluation. In addition, the company can provide shielding type industrial connector, connector with high shielding efficiency and low transfer resistance, to the level of protection to equipment jumper cable transmission.
There are mainly four kinds of connection form industrial connector:
The 1 threaded connections:
Some have larger size contact and electrical connector work a strong vibration in environment is often used in the connection form. This kind of connection in the form of complete connection after the fuse can be installed on preventing loosening. The connection form of the use of reliable, but even unloading speed is slow.
The 2 bayonet connection:
Is a reliable and rapid connection and separation of form. Most card 121 connection in the form of the electrical connector has the right connection and lock the visual display, small hole from the electric connector nut side were observed.
3 plug connection:
Is a multipurpose connection form. The plug and the socket electric connector at the connection and separation of its moving direction is usually straight reciprocating motion, not subject to torsion and rotation, only needs small working space can be completed even unloading. Common plug connected with a ball or pin two structure. The connection form because there is no mechanical labor organization, once the misplug, mechanical resistance, can be found in a timely manner.
4 cabinet connection mode:
Is used in some near the framework requires electrical connector blind on the connected device, can make the electrical equipment made of lighter smaller, easier maintenance and more reliable. This kind of connection form so that the operator cannot feel the connection, we must design a precise positioning device, to avoid electrical connector misplug forced together, the misplug become impossible. Cabinet type electric connector usually adopt a floating or elastic contact design structure to ensure the correct connection.